Gedore IN 19 LKM Screwdriver bit socket set 1/2" 15 pcs in-hex 5-17 mm
In GEDORIT blue sheet steel case
Dimensions: 320 x 210 x 55 mm
INBUS = reg. trademark of Ruia Global Fasteners AG, 41462 Neuss, Germany
Hex bit 1/2" square drive socket: 5mmFor in-hex screws (INBUS), short and long
Hex bit 1/2" square drive socket: 6mm
Hex bit 1/2" square drive socket: 7mm
Hex bit 1/2" square drive socket: 8mm
Hex bit 1/2" square drive socket: 9mm
Hex bit 1/2" square drive socket: 10mm
Hex bit 1/2" square drive socket: 12mm
Hex bit 1/2" square drive socket: 14mm
Hex bit 1/2" square drive socket: 17mm
Hex bit 1/2" square drive socket, long pattern: 5mm x 90mm
Hex bit 1/2" square drive socket, long pattern: 6mm x 90mm
Hex bit 1/2" square drive socket, long pattern: 8mm x 90mm
Hex bit 1/2" square drive socket, long pattern: 10mm x 140mm
Hex bit 1/2" square drive socket, long pattern: 12mm x 140mm
Hex bit 1/2" square drive socket, long pattern: 14mm x 140mm
In GEDORIT blue sheet steel case
Dimensions: 320 x 210 x 55 mm
INBUS = reg. trademark of Ruia Global Fasteners AG, 41462 Neuss, Germany
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
Gedore Warranty (Abridged)
- GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.
- GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.
- The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.