Dark Grey Friday
Tool of the Day™
Essentials
The Holiday Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
The head of the SUPERCRAFT mallet is filled with steel shot. This means that when the workpiece is impacted, the energy of the shot is transferred with a slight delay. The reduced rebound allows the impact energy to be absorbed, resulting in extremely powerful impact without vibration which is much easier on your joints. Additionally, an advantage over steel mallets is the reduced noise level.
Application Areas
Positioning and joining of workpieces in the vice, sheet-metal working, assembly of sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Fence construction, Driving steel wedges, Maintenance / Repair / Overhaul
Completely robot-welded, handle-protection sleeve, very safe handle-head-connection due to aluminum wedge and safety pin, robust powder coating, maximum solidity of the inserts made from special nylon with excellent impact quality and very high durability, handle and inserts replaceable
Material
Inserts:
Nylon, white
hard
very wear-resistant
no chipping
noise-dampening
very high impact
Handle:
Hickory
Dimensions
OAL: 13.19"
Head Length: 4.33"
Application Areas
Positioning and joining of workpieces in the vice, sheet-metal working, assembly of sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Fence construction, Driving steel wedges, Maintenance / Repair / Overhaul
Completely robot-welded, handle-protection sleeve, very safe handle-head-connection due to aluminum wedge and safety pin, robust powder coating, maximum solidity of the inserts made from special nylon with excellent impact quality and very high durability, handle and inserts replaceable
Material
Inserts:
Nylon, white
hard
very wear-resistant
no chipping
noise-dampening
very high impact
Handle:
Hickory
Dimensions
OAL: 13.19"
Head Length: 4.33"
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
Halder, Inc./Picard will guarantee its hammers and striking tools for the lifetime of the tool. This is not to be confused with a "lifetime guarantee". The guarantee is that if a product should break due to faulty materials or workmanship, it will be replaced, and such determination will be left to the discretion of KC Tool or Halder, Inc./Picard.
Halder/Picard will not warranty items that are deemed misused, abused, or have been worn out through normal use.
This includes:
-Halder replaceable face inserts, as they are made to wear and be replaced. UNLESS the insert cracks or breaks under circumstances other than normal wear.
-Wood handles that break from normal use.
-Worn milling on faces or scratched or dented heads and necks from "mis-hits" or overstrikes.
-"Mushroomed" steel faces.
-Hammers that have been used improperly or left out in the elements.
-Hammer claws that have broken due to prying materials other than nails.
-Hammers that sides have been used as the striking surface.
Halder / Picard products are considered the highest quality found anywhere on the market. We stand behind them 100%. If you feel that this product has failed due to reasons other than normal wear, please reach out to us at KC Tool.
Halder/Picard will not warranty items that are deemed misused, abused, or have been worn out through normal use.
This includes:
-Halder replaceable face inserts, as they are made to wear and be replaced. UNLESS the insert cracks or breaks under circumstances other than normal wear.
-Wood handles that break from normal use.
-Worn milling on faces or scratched or dented heads and necks from "mis-hits" or overstrikes.
-"Mushroomed" steel faces.
-Hammers that have been used improperly or left out in the elements.
-Hammer claws that have broken due to prying materials other than nails.
-Hammers that sides have been used as the striking surface.
Halder / Picard products are considered the highest quality found anywhere on the market. We stand behind them 100%. If you feel that this product has failed due to reasons other than normal wear, please reach out to us at KC Tool.
