Stabila Type 196 Jamber Set, 78" Level with Type 80T Extendable Level

Type 196/80T 2 level jamber set
Includes:

Type 196 Heavy Duty 78" Level
Type 80T Extendable Level, 24"-40"

78" Type 196 level is a heavy-duty profile designed to fit in a standard 80" door opening. This allows a contractor to plumb down the jamb legs and eliminate bows in the door frame.
For the header level Stabila has added the redesigned 24-40" Type 80 T Extendable Level to the non-magnetic Jamber Set.
Every level is electronically adjusted, then accuracy inspected and certified.
Vials read the same in all positions
STABILA levels are unparalleled with regard to their accuracy and dependability.
The vials are made of block acrylic glass and firmly epoxy-locked in the frame.
Bright easy to read vials will not leak, break, fog or require re-calibration
Level accuracy guaranteed for life

78" Type 196 Heavy Duty Level
Features a double bridged center vial
Rib-reinforced frame for high strength and light weight. Frame will not warp or twist.
Rubberized hand grips for comfort and grip
Shock-absorbing removable endcaps: Prevent slipping on walls and marking walls. Endcaps can be removed to carry pencil lines tight into corners.
Large metal hang hole to store the level up and off of the work surface
Electrostatic enamel finish: baked on tough, cleans up with water and brush

24 - 40" Type 80T Extendable Level
Extend the length of the level - Just pull out to the length needed and lock it firmly into position
As you extend the level, the marking and cutting edge is continuous along entire length - measure and mark with no interruptions
The measuring surface is precision machined
There are printed scales on the level's topside for accurate layout and quick set ups
A manual lock system tightens the entire system up when you are in position. Click and go.
Red rubber feet on the backside of the level properly grip the wall you are working against. The level will not slip or leave scratches.
High-quality extension mechanism delivers precision - in normal position: closed, your accuracy tolerance will not exceed 1/32in over 72 inches
Extended your tolerance will not exceed 1/16in over 72 inches
Equipment: 1 horizontal vial, 1 plumb vial, 1 measuring surface, extendable system, 1 continuous marking and cutting edge, 1 printed metric scale

Tech. Data:
78" Type 196
Measurement accuracy in normal position: +/- 1/32in @ 72in
Measurement accuracy in reverse position: +/- 1/32in @ 72in
Number of measuring surfaces: 2
Profile: Rectangular profile with ribs
End caps: Removable / Wall Grips / Shock Absorbing

24-40" Type 80T
Measurement accuracy in normal position: +/- 1/32in @ 72in
Measurement accuracy in reverse position: +/- 3/64in @ 72in
Measurement accuracy in extended normal position: +/- 1/16in @ 60in
Measurement accuracy in extended reverse position: +/- 1/16in @ 60in
Number of measuring surfaces: 2
Profile: Rectangular profile with ribs
End caps: Standard