Dark Grey Friday
Tool of the Day™
Essentials
The Holiday Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Stahlwille 7794-2 Motorised calibrating and adjusting tool from 1 to 400 Nm
The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches.
measurement possible without moving the point of application of force.
prevents faulty readings thanks to precision-mounted spindle and finely regulated motor.
extremely accurate calibration thanks to optimised bearings and square drives for the transducers.
rapid, easy change of transducers thanks to quick-release latching system.
convenient pushbutton controls for clockwise and counterclockwise measurements with automatic speed compensation.
saves time because the bridge support is locked in place using a single-handed eccentric lever.
transmission of readings to a PC via USB interface for further processing, analysis and archiving.
calibration certificates can be printed or saved as a PDF file after calibration.
as found / as left calibrations can be documented.
during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request.
can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches.
calibration up to 1000 Nm is possible using the easily attached extension unit No 7791-1
design patent, other patents applied for Both clicking and indicating torque wrenches can be calibrated. Calibration of transducers is possible using reference torque wrenches No 7770-100 and 7770-1000, available on request. 6 calibrating square drive insert tools No 734K (sizes 4, 5, 12, 20, 40, 100), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, 1 software Torkmaster 7731-1, 1 jack cable No 7751, 1 spiral cable No 7752, 1 cable No 7751-1 with jack plug and self-locking precision plug, 1 low-temperature cable connector, 1 hexagon key wrench No 10760CV size 2 mm are included. The unit is supplied without the torque wrench, transducers or notebook. Transducers laboratory No 7728 .
The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches.
measurement possible without moving the point of application of force.
prevents faulty readings thanks to precision-mounted spindle and finely regulated motor.
extremely accurate calibration thanks to optimised bearings and square drives for the transducers.
rapid, easy change of transducers thanks to quick-release latching system.
convenient pushbutton controls for clockwise and counterclockwise measurements with automatic speed compensation.
saves time because the bridge support is locked in place using a single-handed eccentric lever.
transmission of readings to a PC via USB interface for further processing, analysis and archiving.
calibration certificates can be printed or saved as a PDF file after calibration.
as found / as left calibrations can be documented.
during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request.
can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches.
calibration up to 1000 Nm is possible using the easily attached extension unit No 7791-1
design patent, other patents applied for Both clicking and indicating torque wrenches can be calibrated. Calibration of transducers is possible using reference torque wrenches No 7770-100 and 7770-1000, available on request. 6 calibrating square drive insert tools No 734K (sizes 4, 5, 12, 20, 40, 100), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, 1 software Torkmaster 7731-1, 1 jack cable No 7751, 1 spiral cable No 7752, 1 cable No 7751-1 with jack plug and self-locking precision plug, 1 low-temperature cable connector, 1 hexagon key wrench No 10760CV size 2 mm are included. The unit is supplied without the torque wrench, transducers or notebook. Transducers laboratory No 7728 .
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
Stahlwille Tools purchased through KC Tool come with a lifetime warranty against material defects or faulty workmanship except for consumable items such as screwdriver bits and socket adapters. Stahlwille torque products are subject to a separate warranty that has guidelines and regulations on repair labs that have been authorized by Stahlwille to perform service and calibration. The warranty for both torque and non-torque products is void if the tool is tampered with, abused, or used in a manner that is not intended by the manufacturer (i.e. using chrome sockets on an impact gun).
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
