Wera 074722-010 Custom Pre-Set Fixed Torque Screwdriver, 11.0 - 29.0 in-lbs
For any application where the same constant torque and repeat accuracy are required
Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can also be easily adjusted between 11.0 and 29.0 in-lbs using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 105 mm
Total length: 155 mm
Manufacturer's part number 05074722010
Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.
For any application where the same constant torque and repeat accuracy are required
Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can also be easily adjusted between 11.0 and 29.0 in-lbs using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 105 mm
Total length: 155 mm
Manufacturer's part number 05074722010
Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here