Holiday
Tool of the Day™
Essentials
The Holiday Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Wera 074790-010 Custom Pre-Set Fixed Torque Screwdriver, 0.1 - 0.34 Nm
For any application where the same constant torque and repeat accuracy are required
Factory pre-set torque screwdriver with Rapidaptor quick-release chuck
Desired fixed torque setting can be specified in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can be easily adjusted between 0.1 and 0.34 Nm using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 89 mm
Total length: 133 mm
Manufacturer's part number 05074790010
Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.
For any application where the same constant torque and repeat accuracy are required
Factory pre-set torque screwdriver with Rapidaptor quick-release chuck
Desired fixed torque setting can be specified in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can be easily adjusted between 0.1 and 0.34 Nm using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 89 mm
Total length: 133 mm
Manufacturer's part number 05074790010
Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
