Wera 345273 Kraftform Micro Hex Metric Precision Screwdriver Set

Wera
Wera
(18 reviews)
List Price: $32.11
$27.29
(18 reviews)
Stock Status:
item in stock 10+ In Stock.
Adding to cart… The item has been added
SKU:
WR345273
Availability:
1
Shipping:
Free to the lower 48 states at $75+
other US states and territories at $150+
and Canada at $300+
Learn More
Wera 2054/7 Kraftform Micro Electronics Precision Hex Screwdriver
HexPlus Screwdriver: 0.7 x 40mm
HexPlus Screwdriver: 0.9 x 40mm
HexPlus Screwdriver: 1.3 x 40mm
HexPlus Screwdriver: 1.5 x 60mm
HexPlus Screwdriver: 2.0 x 60mm
HexPlus Screwdriver: 2.5 x 60mm
HexPlus Screwdriver: 3.0 x 60mm
Wera's Hex-Plus design helps to keep the screw head in tact with narrow contact surfaces. Standard hex designs tend to round out the screw head.

Designed to reduce the fastening time and cost per screw connection

The spinning cap and the thin profile areas allow for very rapid twisting, and you won't have to readjust your grip.

Hand support on convex/concave cap offers both an easy turning action and comfortable hand rest

Wera Black Point tip and hardening process guarantee long service life and increased corrosion protection

Anti-roll protection stops screwdrivers from rolling away

Manufacturer Part #: 05345273001
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.

All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
Tipstyle:
Hex
Tipsize:
Hex Metric 0.7 mm (0.028 inches)
Tipsize:
Hex Metric 0.9 mm (0.035 inches)
Tipsize:
Hex Metric 1.27 mm (0.050 inches)
Tipsize:
Hex Metric 1.5 mm
Tipsize:
Hex Metric 2.0 mm
Tipsize:
Hex Metric 2.5 mm
Tipsize:
Hex Metric 3.0 mm
Handlematerial:
Multi-Component Material
Indieset:
Tool Sets
Finish:
Black Finish
Country of Origin:
Made in Czech Republic
Stockstatus:
In Stock
UPC/EAN:
4013288147103

18 Reviews Write a Review

  • 5
    Good quality precision micro hex

    Posted by Rod S on Apr 23rd 2017

    Bought these for vintage radio use - I have (European & Soviet sets tend to use metric sizes). Excellent quality hard tips which fit snugly & drive well and, after using them for a few days, I much prefer the handles on these to the other brands (which I have in other sizes/styles). I’m not a big fan of micro-tools with thin handles and spinny caps in general, but the Wera handles are thicker & more usably shaped than most others. Personal preference I guess - but I still wish someone would make small nut/hex drivers with near full-sized handles!

  • 4
    If buying for RC, reconsider

    Posted by Casey on Dec 12th 2016

    While these are nice screwdrivers, they are not "as good" as I hoped. I bought them specifically for use on RC cars, planes and helicopters. While the tips are presciently machined, the handle is disappointing. It's hard plastic and the green grip section offers very little extra friction. It's almost impossible to get any real torque on these things. For smaller fasteners, this is adequate, but the 2.0mm and above are almost useless. To make matters worse, there is no hanging hole so you can't stick something through there for extra torque. Than handles on the Wiha Picofinish are way better, but their hex tips are apparently not very good. In summary, these screwdrivers have excellent blades but unimpressive handles. If you're primarily needing the larger sizes, consider a different kit.

  • 5
    Best Precision Hex drivers I've used

    Posted by Matt Cooper on Apr 14th 2016

    I have been searching for some good micro hex drivers for wrenching on my RC cars. All the ones I owned never fit quite right, always seemed just a hair to small. Both metric and SAE sizes. I bought the Wiha set first since I love their screwdrivers, but the 1.5mm and 2.0mm still ended up rounding out the hexes after a few. - - I tried Wera Hex plus that looked just like what I thought I needed. They can be a little snug to fit sometimes, but I'll take that over drilling out the hex that I stripped out with the other drivers. Now I want to upgrade all my drivers to Wera.

  • 5
    Great qualtlity micro allens

    Posted by John Sullivan on Feb 13th 2016

    These things rock! Thank you!

  • 5
    High Quality

    Posted by Thomas Peretti on Dec 27th 2015

    The tips are nice and sharp and made to a high tolerance.

  • 5
    Quality is worth a little more money.
    Unknown

    Posted on Aug 27th 2015

    I've learned this lesson well, especially when it comes to tools. Quality tools last and they make the work you do a pleasure instead of a pain. I've used Wera tools at work for a while now and have not been disappointed. I like everything about them. Great tools, period.

  • 5
    perfect for fine and accurate use

    Posted by eric Ragot on Oct 13th 2014

    Though lacking the torque of larger handled hobby driven hex drivers, these fit perfectly and make my rc chores that much easier. Wish they were German made but heck, I like the Czech republic too.

  • 5
    Excellent product

    Posted by Bruno on Sep 25th 2014

    High end quality product, very nice design and handling. Rather than the ball-end model for those Hex size. Will buy Wera product again.

  • 5
    Micro hex drivers

    Posted by John D. Luthe on Jan 19th 2014

    The drivers are well built. Top quality. Hold very nicely in the micro hex head cap screws. Would recommend highly. The website was easy to use and the transaction was smooth.

!