Gedore 620 Square Drive to Hex Bit Adaptor, 1/4"-1/4"

Most 1/4 inch ratchet drives have a square coupling. This adapter allows the use of hex-drive sockets that are better able to reach into tight or close clearance areas. The adapter also features a snap-type retainer in the hex end that is particularly useful for socket retention.

My first impression is I really appreciate the knurling. I haven't put it through it's paces yet but I went ahead and picked one up when I saw they were back in stock.

These are very nice adapters.

Quality product at a competitive price. Good bit holding ability. I have purchased a few of these.

It's got a nice thin profile for hard to get to areas. The tension on the bit is good! The bit tension is actually adjustable. If you rotate the round spring ring/retainer you can loosen/tighten the force on the bit. Stare at it for a minute and then rotate the spring ring, then you will see what I mean. I don't think this is meant to be part of the design but it's a little tool "hack" for ya!

I've been through several 1/4 hex to square bit adaptors and this is hands down the best I've tried. Positive retention without being too stiff, good size (small enough dia.) and the knurling is fantastic for spinning with your fingers.

This is a very well made bit adaptor. I'm impressed.

this tool is so easy and nice to use fits all of my drive bits.

These adapter fit well on my Wera Zyklops.

First, I don't usually rate things 5 stars. To me, 4 stars is very good and 5 means it has to be truly exceptional or perfect.

I'm rating this a 5 because yeah, it's exceptional. I tried numerous 1/4" bits in this from cheap to expensive and ALL of them hold very well. The compression sleeve that holds the little ball in to put tension on the bit is phenomenal. I don't think I'll have to worry about losing a bit ever.

The quality is just better than any other pieces I've owned. Couldn't be happier. Using this on both a 1/4" ratchet wrench and an Armstrong 10-943 1/4" driver.

Great bit holder socket. The internal retainer provides an excellent hold on the bit. The external spring is flat and smooth - nothing to snag on.

Excellent tool for making all your hex bits work with a 1/4 inch driver. It's brilliance is its thin diameter for getting into tight places.

It's a bit adaptor, nothing special.

Bought this to replace a miss-sized craftsman socket bit holder, this thing is amazing. Best 1/4" socket end bit holder I've ever owned, worth the price in never having to worry about the bit falling out

looks good and durable. Bits fit pretty well.

Great little bit for holding bits on ratchets.

Nice quality, bits fit nice and snug. If your in need of one this one is worth checking out.

Perfect accessory to use 1/4" bits with a 1/4" drive torque wrench or ratchet. Quality is the usual Gedore.

Very good quality.

I added this to my Wera 1/4" set as it is smaller than what came with that set. Good profile and holds 1/4" bits well.

A very solid and visually pleasing adaptor. The inside of the tool had metal chips still attached, but a quick brush out fixed it up. I would give it 5 stars otherwise. This was my first Gedore part, so I'm not sure if this is normal.

As the subject line reads, handy for bit driving using 1/4" ratchet wrenches, e.g. when a specific fastener torque is called for. Well made; holds bits securely.

cheap and pretty

Magnetic versions of 8this tool just do not hold up to use with an impact.

Very good quality and weight

Bit fitment and locking is superb. Great value for the money.

It appears to be well made and functions as described. I appreciate the knurl which comes in handy.